Trane XE80 furnace don't ignite and blow only cold air? - user manual for the air walker
The furnace I was 10 years old Trane XE80 with me this morning, we have found to stop pump hot air when I checked, I could not find the power button to work but the fan still works, so that I can do is to blow cold air.
Can someone me suggestions as to how the problems of fire. And you send me more of a manual, it will be great to chat box problem.
Thank you.
Saturday, November 7, 2009
User Manual For The Air Walker Trane XE80 Furnace Don't Ignite And Blow Only Cold Air?
Subscribe to:
Post Comments (Atom)
3 comments:
The more difficult problem is an easier ... this can verlfy by removing the top cover, so you can see the burner ... Turn the oven ... To make TSTAT 80 degrees and heat .... Power in the oven, you should hear the gas valve after winning an output of about 20-30 seconds, you [will be a slight click to hear] .. then you should flow the gas through the burner for about 5 seconds, then hear the control board, the gas valve .... If this makes the scenario, it is necessary to replace the fuse, not too hard if you're wise, provided you can use a .. FYI, if you are using a lighter to the igniter OEM thats like an oven, but not the exact replacement is not much, but it must be used, which has the same heating time .. if the base is easier Sqare ceramic white, about 1.5 "x 1.5", while the rapid heating type, if the ceramic is rectangular, about 2.5 "x 1", while a slow warming .. important to ensure that their ignition systems .. Legislation to be sold by the suppliers of HVAC, some only sell to professionals, but not the public ..... Senators also clean the flameER, whereas it is now, it is a thin metal rod on the lighter side burner for clean, scrub with a Scotch Brite pad or steel wool to turn off the stove ...... daN
Have the company? Must be able to replace the device.
Have the company? Must be able to replace the device.
Post a Comment